UpWriteDataER

This error,please check your serial No.
AtuoGM Data ERROR!

This error,you need set parameter again after upgrade.
UpWriteDataER
This error,please check your serial No.
AtuoGM Data ERROR!
This error,you need set parameter again after upgrade.
Hi!
I need a firmware update and I don’t know how to reach you…
Here’s the ID of my controller:
55F255F3 42446012 8A8ADFDB
My email should be included with my comment, if not I’ll let you know.
Thanks!
check email.
Just be be clear, my previous firmware request is for the SMC4-4-16A16B model.
Thanks!
Hi, please send update file to smc4-4-16a16b
ID 55D855E8 3F475618 8B88DCDD
sent email
Hi, please send update file and upgrade instructions for smc4-4-16a16b
ID 55E055D8 43456012 858AE3E2
can the latest firm ware support G93 and 94? can you send me the latest firm ware?
don’t support
how do i control the 4th axis speed it appears to run slower the the feed rate on the other axis
You can set the equivalent, maximum speed, and acceleration to be the same,
The feed rate in multi-axis linkage is the vector calculated value of the axis parameters
is there more in-depth manual on the 4th axis settings
no
can you tell me how to get the 4th axis setting on the controller? how do i adjust the speed on the controller. can it be switched to move faster
What screens control the speed of the 4th axis
The control mode of the 4th axis and other axes is the same
Hi, will you please send me update file and upgrade instructions for smc4-4-16a16b
ID 55E055D8 43456012 858AE3E2
download here https://www.shaogecnc.com/wp-content/uploads/2022/01/55E055D843456012858AE3E2.rar.zip
PLease send upgrade file for SMC4-4-16a16b ID. No. 55FC55FA 465D5F28 758DE1F6.
https://www.shaogecnc.com/wp-content/uploads/2022/01/55FC55FA465D5F28758DE1F6.rar.zip
smc 4-4 16a-16b plasma needs pin number to work
to connect thc control
No THC control port,Only PWM or 0-10V