Q:
Yesterday we did something stupid, and after the successful firmware update gave the “G0XYZF” system command without the correct “system.rar” file on the MicroSD card. Now we lost the Chinese language altogether, and all the Chinese language characters are just a black square. English seems still to work almost fine, although some symbols are also missing when using English. Could you please supply to us the correct “system.rar” file with the English and Chinese languages?
I would be very grateful for this file and I feel very ashamed now that we used a system command we don’t fully understand.
(I also wonder if it would be possible for me to compile a special system.rar file with Finnish language? This would be also a very interesting project for later times. Our professors would be very pleased if I could show the device operating in Finnish language instead of English.)
hi
smc4 16a 16b
please send uprgade file .
my id
55DB55DD 41436014 8B8CE 0E1
check email.
PLease send upgrade file for SMC4-4-16a16b ID. No. 55FC55FA 465D5F28 758DE1F6.
https://www.shaogecnc.com/wp-content/uploads/2022/01/55FC55FA465D5F28758DE1F6.rar.zip
PLease send upgrade file for SMC4-4-16a16b ID. No. 55FC55F7 3F446029 8A88DDE3
https://www.shaogecnc.com/wp-content/uploads/2022/02/55FC55F73F4460298A88DDE3.rar.zip
Good afternoon. My name is Edgardo, with my 6040 cnc router machine, I have the smc4-4-16a16b controller installed with an AE-200 inverter.
1.- The machine is working for me with the controller buttons +X, +Y, +Z backwards, that is, I press the +X and now it moves to the LEFT, and the -X moves to the RIGHT and all the others in the opposite direction to normal.
I want to update the firmware of SMC4-4-16A 16B controller, maybe then it will get working again. I can’t find the controller serial number. Greetings.
hi,don’t updata, just change the direction pulse level to 0 or 1
I would appreciate it if you tell me in which menu window I make the modification…
MACHINE
MotoBasic
LimitedIN
home
I/O Out
SoftLimit
G Codec
Key IO
Spindle
Factory
Thanks for your reply…
motobasic – dirlowactive
Thank you very much dear Jason, your answer has helped me a lot.
smc4 16a 16b
Please send upgrade file .
my ID: 55DC55FB 465D5F28 758DE1F6
https://www.shaogecnc.com/wp-content/uploads/2022/03/55DC55FB465D5F28758DE1F6.rar.zip
Hi Jason. Good evening. My name is Edgardo, with my 6040 cnc router machine, I have the smc4-4-16a16b controller installed with an AE-200 inverter.
With you I was able to solve a previous problem, thank you.
Now I have another…
I use ArtCam 2018, but when I insert the microchip in the smc4-4-16a 16b controller, the machine runs the model, but very reduced in size.
When I set Spindle movement in x,y,z to 1mm, or 0.1mm or 0.01 it works fine.
You may know why the smc4-4-16a 16b controller scales down all model measurements when machining.
Thanks for your attention. Kind regards
please Check if the code generated by ARTCAM is correct and the unit is in mm
Hi,
smc4-4-16a16b
please send uprgade file .
id
55C855DA 63625F18 758AE3F2
https://www.shaogecnc.com/wp-content/uploads/2022/05/55C855DA63625F18758AE3F2.zip