SMC5 G-code

Q:I remark it is impossible to manage sub program (G7x codes) and also some codes to change tool (Tx, M6, Hx, …)
Do you plan to take it into account in the future ?

A:G7x is not currently supported, and AutoGM function can be used for tool change

Q:The function “All Shaft Reset” does not work correctly.
Axes Z,A,B – do not reset

A:“All shart reset” only clears the workpiece coordinates, is it the current display of the machine coordinates, clr origin is the clearing of the machine coordinates, or this, “Machine-home– referenceCoor–Zero DCoor”, this value is modified, the default value is 0

10 thoughts on “SMC5 G-code”

      • I have a SMC5-5-N-N offline controller
        ID#5582AACA 505C5F23 75E289EE 00000003
        Copyright 2020-8-13
        ShaoGe CNC V4.0.0

        I would like to get the latest firmware update please.
        Can this controller be changed from metric to inches?
        Please email me the latest firmware and if possible how to convert from metric to inches or explain what I need to do to change this if it is possible. Please return an answer either way.
        Thank you for your help

        Reply
  1. I helped a friend install an SMC5 on his CNC that used a PC Controller. We have it running in Jog. But we need HELP on what post processor to use with V-Carve and Fusion360. We have tried the Mach3 post processor and can’t get it to read or run the code.

    Send me a working g-code and information on what post processor.

    Reply

Leave a Reply to Randy T Cancel reply